• Odroid C0 - Multicore Headerless Prototyping Computer [77110]

The ODROID-C0 is a computer for those who wish to make a more flexible and portable applications. It is a minimized hardware version of the ODROID-C1+. Battery power circuit is fully integrated. Just attach a 3.7V Li+ battery and make it mobile. It is highly suitable for IoT projects, wearables, and other applications that require a lightweight device. 


All the ODROID-C1/C1+ OS images are fully compatible with the ODROID-C0. Some of the modern operating systems that run on the ODROID-C0 are Ubuntu, Android, Arch Linux, Debian, and OpenELEC, with thousands of free open-source software packages available. There are also plenty of custom OS available for using the ODROID-C0  as a multimedia center, Kodi, gaming station, headless server and much more at our ODROID community. 


The key features and improvements over the original ODROID-C1+: 


* Amlogic ARM® Cortex®-A5(ARMv7) 1.5Ghz quad core CPUs 

* Mali™-450 MP2 GPU (OpenGL ES 2.0/1.1 enabled for Linux and Android)

* 1Gbyte DDR3 SDRAM

* eMMC4.5 HS200 Flash Storage slot / UHS-1 SDR50 MicroSD Card slot

* 40pin + 7pin GPIOs (unpopulated)

* USB 2.0 Host x 2 (unpopulated)

* Infrared(IR) Receiver (unpopulated)

* Li+ rechargeable battery charger for wearable and robots application 

* Battery voltage level is accessible via ADC in the SoC.

* DC/DC step-down converters for higher power efficiency 

* DC/DC step-up converter for 5Volt rails (USB host and HDMI) from a Li-Polymer battery

* DIY friendly C0 Connector Pack is available for handy prototyping



The ODROID-C0 is a low cost and lightweight variant of the original ODROID-C1+ model. The PCB size is reduced by a quarter, and the weight is reduced to less than half of the original (16g from 40g).


– Added a Lithium-polymer battery management IC.

– Removed Gigabit Ethernet connectivity.

– Reduced the number of USB host ports to two from four.

– Removed the USB-OTG port.


ProcessorAmlogic S805 SoC ARM® Cortex®-A5 (ARMv7) 1.5GHz Quad Core ARMv7 architecture @28nm wafer
Memory1Gbyte DDR3 RAM 792Mhz
3D AcceleratorARM® Mali™-450 MP2 OpenGL ES 2.0 / 1.1
Flash Storage
eMMC Module Socket : eMMC module (option)
MicroSD Card Slot : 8~128GB MicroSD UHS-1 (option)
USB2.0 HostHigh speed standard A type connector x 2 ports
Video OutputHDMI
Audio OutputHDMI, I2S
Real Time ClockOn-board RTC function with a coin-shaped backup battery connector
IO Expansion
40pin port (GPIO/UART/SPI/I2C/ADC)
7pin port (I2S)
WiFiUSB IEEE 802.11b/g/n 1T1R WLAN with Antenna (USB module) (option)
Power
5V 2A Power (option)
3.7V Li+ battery power
System Software
Ubuntu 14.04 + OpenGL ES on Kernel 3.10 LTS
Android 4.4.x on Kernel 3.10 LTS
Full source code is accessible via our Github.
PCB Size
58 x 56 x 11 mm approx. (Weight : 16 gram w/o heat sink,   30 gram with an optional heat sink)
PCB Thickness : 1.0mm
Product Information
Brand Hard Kernel
Product Code HardKernel Odroid C0

Odroid C0 - Multicore Headerless Prototyping Computer [77110]

  • Brand: Hardkernel
  • Product Code: Odroid C0 - Multicore Headerless Prototyping Computer
  • Availability: In Stock
  • 50.50€

  • Ex Tax: 41.39€