ODROID-H3

A significant advancement over its predecessor, the Odroid H2+, the ODROID-H3 boasts a 64-bit chipset. The H3+ model delivers enhanced power and performance while maintaining power efficiency. Notably, it retains the same form factor as the ODROID-H2.


Key Features:

  • Intel® Quad-Core Processor Jasper Lake N5105: This processor operates at a base clock of 2GHz, with a boost clock of 2.9GHz. It features 1.5MB L2 and 4MB L3 cache, all achieved through a cutting-edge 10 nm process.
  • Up to 64GB Dual-Channel DDR4 Memory (PC4-23400): The ODROID-H3 supports dual-channel memory, allowing for a maximum capacity of 64GB (2933MT/s).
  • Expandable Memory: With two SO-DIMM slots, each accommodating up to 32GB, the ODROID-H3 provides flexibility for memory upgrades.
  • High-Speed Storage: The board features PCIe 3.0 x4 lanes, enabling seamless integration of M.2 NVMe storage.
  • Advanced Connectivity: Equipped with 2 x 2.5Gbit Ethernet ports and 2 x SATA 3.0 ports, the ODROID-H3 ensures efficient data transfer.
  • SSE4.2 Accelerator: Supporting a range of instructions (SMM, FPU, NX, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, AES), this accelerator enhances computational capabilities.
  • Intel UHD Graphics with 24 Execution Units (EUs): The integrated graphics operate at a turbo frequency of 800MHz, providing crisp visuals.
  •  Video Output Options: The board supports HDMI 2.0 and DP 1.2, allowing for multiple video outputs.
  • Unlimited Performance Mode: Users can configure the CPU to sustain turbo boost mode for optimal performance.
  • RTC and BIOS Backup: The ODROID-H3 includes an RTC (real-time clock) and a BIOS backup battery.


**** For optimal performance, we recommend pairing the ODROID-H3 with the Kingston 16GB DDR4 SODIMM ****

Board Detail




  • A. CPU (Intel Celeron N6005)
  • B. 2 x DDR4 SO-DIMM slots (Dual channel memory support)
  • C. 1 x M.2 PCI Express Module Socket (NGFF-2280)
  • D. 1 x eMMC (Embedded Multimedia-Card) Socket
  • E. 2 x SATA Power Connectors (2.5mm pitch, JST-XH compatible connector)
  • F. 2 x SATA3 6.0 Gb/s Data Connectors
  • G. 1 x DC Power Jack
  • H. 2 x USB 3.0
  • I. 2 x USB 2.0
  • J. 1 x HDMI 2.0
  • K. 1 x DisplayPort 1.2
  • L. 2 x RJ45 Ethernet Ports (10/100/1000/2500)
  • M. 5 x System LED Indicators
  • N. 1 x Peripheral Expansion Header (24-pin)
  • O. 1 x Power Switch
  • P. 1 x Reset Switch
  • Q. 1 x Backup Battery Connector (2-pin)
  • R. 1 x Active Cooling Fan Connector (4-pin)
  • S. 1 x Audio out, 1 x Audio in, 1 x SPDIF out

Game Emulation Demo Video




Full Specification

ProcessorIntel Celeron N6005 Processor (10nm, Quad-Core, TDP 10W)

H3+(N6005) : up to 3.3Ghz

4MB L2 Cache

Intel UHD Graphics (24/32 EU up to 900MHz)

Memory2 x DDR4 1.2V SO-DIMM slots

Dual Channel, up to 2933 MT/s (DDR4-PC23400)

Max memory capacity 64GB

DDR3/DDR5 are not supported

Storage1 x eMMC connector (bootable and selectable on BIOS)

Various eMMC modules can be purchased at Hardkernel store

2 x SATA3 6Gbps

1 x M.2 slot (PCIe 3.0 x 4, supports NGFF-2280 cards)

M.2 SATA SSD is not supported

Networking2 x GbE LAN ports (RJ45, supports 10/100/1000/2500 Mbps)

Realtek RTL8125B

Supports Wake-On-Lan

LED indicators (Green: Link, Amber: Traffic)

Video1 x DisplayPort 1.2 (up to 4K@60Hz)

1 x HDMI 2.0 (up to 4K@60Hz)

Dual simultaneous display support

Audio1 x Audio out (3.5mm jack)

1 x Audio in (3.5mm jack)

1 x SPDIF out (ALC1200, HDA codec)

* HDMI & DP have audio output too.

External I/O2 x USB 3.0 Host ports

2 x USB 2.0 Host ports

1 x Peripheral Expansion Header (24-pin, 2.54mm pitch)

– 1 x DC 5V, 1 x DC 3.3V, 5 x GND

– 1 x UART (TXD/RXD/RTS/CTS)

– 2 x I2C (SCL/SDA)

– 1 x External Power Button

– HDMI CEC, 5VA+

– 3 x USB 2.0

– All 3.3V I/O signal level

Other featuresPassive Heatsink

BIOS Backup Battery

– Maintains system time and BIOS settings

Power Button

Reset Button

System LEDS Indicators:

– Red (PWR) – Solid light when DC power is supplied

– Blue (left, SLEEP) – turns off only when the system enters into suspend mode

– Blue (right, PMIC) – turns on only when the major power rails are working

– Amber (SATA) – Flashes when SATA data transfers

– Green (NVMe) – Flashes when NVMe data transfers

Active Cooling Fan Connector (12V 4-pin, PWM input + TACHO output)

– Active Cooling Fan is optional

– Connector (4-pin, 2.54mm pitch)

PowerDC jack : outer (negative) diameter 5.5mm, inner(positive) diameter 2.1mm

DC 14V ~ 20V (up to 60W)

– DC 15V/4A power adapter is recommended if you don’t use two 3.5“ HDDs

– DC 19V/7A power adapter is recommended if you two 3.5” HDDs together

Power consumption:

– IDLE : ≃1..9W

– CPU Stress : ≃15W

– CPU+GPU Stress : ≃18W

– Power-off : ≃0.25W

– Suspend : ≃0.6W

Form Factor110mm x 110mm x 47mm Approx.
Product Information
Brand Hard Kernel
Product Code ODROID-H3

ODROID-H3 [83001]

  • Brand: Hardkernel
  • Product Code: ODROID-H3
  • Availability: In Stock
  • 230.64€

  • Ex Tax: 189.05€

Available Options