The ODROID H2+ is a 64Bit Windows 10 compatible SBC system. Tool it up with RAM, an HDD (or .m2/ SSD Drive) and an Operating System, and it is a very capable Windows PC system.

** END OF LIFE - NO LONGER AVAILABLE **

Key Features

  • Intel Quad-core processor J4115 (14nm) with 4MiB Cache, up to 2.5Ghz(Single Thread) or 2.3Ghz(Multi Thread)
  • Dual-channel Memory DDR4-PC19200 (2400MT/s)
  • Total 32GiB RAM Space with two SO-DIMM slots
  • 4 x PCIe 2.0 for one M.2 NVMe storage
  • 2 x 2.5Gbit Ethernet ports
  • 2 x SATA 3.0
  • SSE4.2 accelerator (SMM, FPU, NX, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, AES)
  • Intel UHD Graphics 600 (Gen9.5 LP GT1) up to 700Mhz
  • HDMI 2.0 and DP 1.2 multiple 4K/60Hz video outputs
  • RTC / BIOS backup battery is included

Please manually install Realtek RTL8125B driver to activate the Ethernet ports. Otherwise the Ethernet ports don’t work due to a missing device driver in Linux Kernel. 

WiKi page: https://wiki.odroid.com/odroid-h2/start

Ubuntu 20.04 x86 64bit OS compatible out of the box. Download the OS image from official Ubuntu homepage.




Demo Video

Board Detail



A



CPU (Intel Celeron J4115 Processor)

K1 x DisplayPort 1.2
B2 x DDR4 SO-DIMM slots (Dual channel memory support)L2 x RJ45 Ethernet Ports (10/100/1000/2500)
C1 x M.2 PCI Express Module Socket (NGFF-2280)M5 x System LED Indicators
D1 x eMMC (Embedded Multimedia-Card) SocketN1 x Peripheral Expansion Header (24-pin)
E2 x SATA Power Connectors(2.5mm pitch, JST-XH compatible)O1 x Power Switch
F2 x SATA3 6.0 Gb/s Data ConnectorsP1 x Reset Switch
G1 x DC Power JackQ1 x Backup Battery Connector (2-pin)
H2 x USB 3.0R1 x Active Cooling Fan Connector (4-pin)
I2 x USB 2.0S1 x Audio out
1 x Audio in
1 x SPDIF out
J1 x HDMI 2.0

Specifications

Form Factor
  • Dimensions: 110mm x 110mm x 47mm
  • Weight: 285 g including heatsink
Processor
  • Intel Celeron J4115 Processor (14nm, TDP 10W)
  • Up to 2.5Ghz(Single Thread) or 2.3Ghz(Multi Thread)
  • 4MB L2 Cache
  • UHD Graphics 600 (Gen 9.5 LP GT1 up to 700MHz)
  • Fan-less design
Memory
  • 2 x DDR4 1.2V SO-DIMM slots
  • Dual Channel, up to 2400 MT/s (DDR4-PC19200)
  • Max memory capacity 32GB
    • DDR3 is not supported
Storage
  • 1 x eMMC connector (bootable and selectable on BIOS)
    • Various eMMC modules can be purchased at Hardkernel store
  • 2 x SATA3 6Gbps
  • 1 x M.2 NVMe slot (PCIe 2.0 x 4, supports NGFF-2280 cards)
    • M.2 SATA SSD is not supported
Networking
  • 2 x 2.5GbE LAN ports (RJ45, supports 10/100/1000/2500 Mbps)
  • Realtek RTL8125B
  • Supports Wake-On-Lan
  • LED indicators (Green: Link, Amber: Traffic)
Video
  • 1 x DisplayPort 1.2 (up to 4K@60Hz)
  • 1 x HDMI 2.0 (up to 4K@60Hz)
  • Dual simultaneous display support
Audio
  • 1 x Audio out (3.5mm jack)
  • 1 x Audio in (3.5mm jack)
  • 1 x SPDIF out (ALC662, HDA codec)
External I/O
  • 2 x USB 3.0 Host ports
  • 2 x USB 2.0 Host ports
  • 1 x Peripheral Expansion Header (24-pin, 2.54mm pitch)
    • 1 x DC 5V, 1 x DC 3.3V, 5 x GND
    • 2 x UART (TXD/RXD/RTS/CTS)
    • 2 x I2C (SCL/SDA)
    • 1 x External Power Button
    • HDMI-CEC, 5VA+, D+, D-
    • All 3.3V I/O signal level
  • Note that you have to connect an HDMI-CEC adapter board(sold separately) to the 24-pin header to use the HDMI CEC function.
Other features
  • Passive Heatsink
  • BIOS Backup Battery
    •  Maintains system time and BIOS settings
  • Power Button
  • Reset Button
  • System LEDS Indicators:
    •  Red (PWR) – Solid light when DC power is supplied
    •  Blue (left, ALIVE) – Solid light when System is running
    •  Blue (right, RESET) – When the RESET button is pressed
    •  Amber (SATA) – Flashes when there is data transfer
    •  Green (NVMe) – Flashes when there is data transfer
  • Active Cooling Fan Connector (5V 4-pin, PWM input + TACHO output)
    • Active Cooling Fan is optional
    • Connector (4-pin, 1.25mm pitch)
Power
  • 1 x DC jack : outer (negative) diameter 5.5mm, inner(positive) diameter 2.1mm
  • DC 14V ~ 20V (up to 60W)
    • DC 15V/4A power adaptor is recommended
  • Power consumption:
    •  IDLE : ≃4W
    •  CPU Stress : ≃14W
    •  CPU+GPU Stress : ≃22W
    •  Power-off : ≃0.5W
    •  Suspend : ≃0.6W
Product Information
Brand Hard Kernel
Product Code Odroid-H2+ X86 Quad-core SBC

Odroid-H2+ [77800]

  • Brand: Hardkernel
  • Product Code: Odroid-H2+
  • Availability: In Stock
  • 259.56€

  • Ex Tax: 212.75€

Available Options